Once flashing is complete, disconnect the USB cable and attempt to turn on your device. The first boot may take longer than usual (5–10 minutes). If the device does not boot properly, boot into recovery mode and perform a factory reset / wipe cache partition.
: Unzip both the SP Flash Tool and your firmware into separate folders. Launch Tool flash_tool.exe from the extracted SP Flash Tool folder. Load Scatter File Scatter-loading File and select the Android_scatter.txt file found inside your firmware folder. Select Flash Mode Download Only : Recommended for simple firmware updates or repairs. Firmware Upgrade : Use this if the device partition table has changed. Format All + Download as it can erase critical network data like IMEI numbers. Start Connection : Click the button in the tool. Connect Device sp flash tool kurdish firmware
Unlike the standard tool, this version has a dedicated checkbox or button. Click this to skip the security check that often causes "Authentication" errors. Configure Flash Settings : Once flashing is complete, disconnect the USB cable
Right-click on the installer setup file and select . : Unzip both the SP Flash Tool and
Wipes the device and upgrades the file system structure. Use this if changing Android versions.
