Xinje Plc Program Tool 3.7 💫

: Run the XDPPro.exe setup wizard, selecting your preferred installation directory.

: Connect your PLC using an RS232-USB cable. Navigate to Option > Software Serial Port Config to run a "Comm-Test" and ensure the status shows "Connect To PLC Succeeded". Xinje Plc Program Tool 3.7

A prompt will ask whether to stop the PLC CPU before writing. Select . : Run the XDPPro

| Problem | Solution | | :--- | :--- | | Installation fails or gets stuck | Disable antivirus/firewall completely. Run the installer as Administrator. Ensure .NET Framework 2.0 is installed manually before running setup. | | Software cannot find the PLC (USB) | Reinstall the USB drivers (found in the XDPPro installation folder or via XINJEConfig). Try a different USB port. Ensure the cable is a data cable, not a charging-only cable. | | Software cannot find the PLC (Ethernet) | Verify the PLC IP address (default 192.168.6.6). Verify the PC IP address is in the same subnet (e.g., 192.168.6.10). Disable VPNs or Virtual Machine network adapters. Check the "XNET Config" service status in Windows Services. | | Error: "Failed to connect: XNET not responding" | The XNET driver may be corrupted. Uninstall "XNET Config" from the Control Panel, reboot, and reinstall it via the XDPPro installer. | | Error: "Write protected" or "No permission" | You installed the software in C:\Program Files . Reinstall to a non-system drive (e.g., D:\XINJE ). | | Program uploads but ladder is gray/empty | The PLC program has been downloaded with . You need the original password to view the source code. | A prompt will ask whether to stop the PLC CPU before writing