Set the GPS to output at 4800 baud, 8 data bits, no parity, 1 stop bit (8-N-1). The installation manual provides the exact sentence requirements (GGA, RMC recommended).
The Samyung SRG-1150DN requires a stable power source to handle high current draw during 150W transmissions. DC Power Supply Requirements samyung srg-1150dn installation manual
: Position the mounting bracket or base plate on the flat deck desk or console surface. Mark the locations of the four fastening screw holes. Set the GPS to output at 4800 baud,
For IMO compliance, use an individual power supply like the . Antenna System : Frequency range: TX 1.6~27.5MHz ; RX 500KHz~29.9999MHz . Input impedance: . 8 data bits
Ensure the ATU has a direct, ultra-low resistance connection to the vessel's RF ground plane. 3. Antenna Installation and Grounding