The X‑Pro includes : if the electricity cuts out mid‑print, the printer saves the current state. When power is restored, it can reheat the bed and nozzle, re‑home X and Y, and resume printing from exactly where it stopped. Note that there will usually be a small visible mark at the recovery point, and materials like ABS are more prone to warping after a pause than PLA or PETG.
Apply a thin layer of lithium grease or sewing machine oil to the linear rails and Z-axis lead screw. qidi x-pro manual
Understanding your printer's capabilities is essential for successful prints. 230 x 150 x 150 mm Extruder Type: Dual Extruder (Direct Drive) Nozzle Diameter: 0.4 mm Max Extruder Temp: 250°C Max Bed Temp: 120°C Filament Diameter: 1.75 mm Connectivity: Wi-Fi, Ethernet, USB Flash Drive Supported Materials: PLA, ABS, PETG, TPU 2. Unboxing and Hardware Assembly The X‑Pro includes : if the electricity cuts
Snip the plastic zip ties securing the X-axis and Y-axis gantry to prevent motor damage during transit. Apply a thin layer of lithium grease or
Carefully lift the printer out of the box. Remove all protective foam inserts, zip ties, and tape securing the X and Y axes.
Carefully cut away all plastic zip ties and remove the foam blocks holding the X-axis and Y-axis rods in place. Manually move the extruder assembly to ensure it glides smoothly. Step 2: Install the Extruder Assembly
Turn on the printer and select > Leveling on the touchscreen.