: Set the minimum spacing between parts (usually equal to or greater than the material thickness).
Never send code to the machine without simulating. bysoft cam tutorial
: Tutorials demonstrate how to import STEP or DXF files and use the "unfold surface" command to calculate material thickness and create accurate unfolding patterns. Automated Nesting : Set the minimum spacing between parts (usually
| Problem | Likely Cause | Fix in BySoft CAM | |--------|--------------|-------------------| | Part falls into scrap | No microjoints | Add 2–3 bridges | | Burn marks on start | Lead-in too short | Increase lead-in to 5mm | | Nozzle collision in simulation | Sheet warpage modeled | Reduce cut height or add Z-avoidance | | Laser doesn't cut through | Wrong material library | Check thickness + gas selection | Automated Nesting | Problem | Likely Cause |
: Automatically creates bending programs and selects the correct tools for press brakes.
Once the geometry is finalized, you must define how the laser cuts the part.