This comprehensive guide covers the theory, the hardware requirements, the software configuration, and the step-by-step manual installation process to get your G-Force panel running with the GEA ecosystem.
Carefully lift the panel assembly into position using a team lift or hoist. Pass the mounting bolts cleanly through the center of the rubber isolators. Mount the remaining half of the isolator on the backside, then thread and secure the stainless steel hex nuts. 3. Electrical and Signal Wiring
dnf groupinstall "Development Tools" -y dnf install wget curl tar gzip make cmake gcc-c++ -y dnf install epel-release -y
If you need Apache instead of Nginx, change --with-web-server=apache .
The GEA GForce control panel is an industrial microprocessor-based system primarily used for managing refrigeration compressor packages, including screw, reciprocating, and centrifugal models
Connect your laptop to LAN1 using a cross-over cable (or straight-through via a switch). Set your laptop’s IP to 192.168.1.100 (subnet mask 255.255.255.0 ).
