Fix: Minipro 6.85

That changed around .

在 2018 年前后，Xgecu 推出了 MiniPro 软件的第 6.85 版。根据 GitLab 上开源项目 minipro 的固件版本记录，6.85 版所对应的固件版本号为 3.2.86，发布日期为 2018 年 10 月 19 日。在当时，这一版本不仅提升了软件的稳定性，同时还优化了对于新型存储芯片的烧录算法，让 TL866 编程器在性价比之路上更进一步。 minipro 6.85

The only area where it falls short is high-speed CAN bus flashing or modern encrypted MCUs (like Tricore Gen 2 or SPC5). For those, you will need a dedicated tool. That changed around

Have you used the MiniPro 6.85? Share your experience in the comments below. For more 3D printing reviews, guides, and troubleshooting, subscribe to our newsletter. Have you used the MiniPro 6

Filament grinding. Solution: Your retraction distance is too high. For direct drive, set retraction to 1.0mm at 25mm/s (not 6mm like Bowden).

MiniPro version 6.85 is the final software and firmware update for the now-obsolete universal programmers. Key Release Details Release Date: The software was originally released in July 2018.