Gt9xx1024x600 !link! Guide

You must enable the driver in the kernel config ( CONFIG_TOUCHSCREEN_GT9XX=y ) and define the GT9xx node in the device tree, specifying the I²C address ( reg = <0x5d> ) and GPIO pins for interrupt and reset.

is a versatile, affordable display solution. Proper troubleshooting involves ensuring correct , device tree configuration , and firmware loading for the GT9xx controller gt9xx1024x600

Device Drivers → Input device support → Touchscreens → GT9XX I2C touchscreen You must enable the driver in the kernel

Copy gt9xx.c and gt9xx.h into drivers/input/touchscreen/ in your kernel source tree. device tree configuration

Connect the LCD panel to the driver board via the 40/50-pin FPC cable.

Select * to compile the driver into the kernel, or M to compile it as a module.