Eeupdate-5.35.12.0.zip

| Command | Function | | :--- | :--- | | /HELP or /? | Displays a full list of available command-line options and exit codes. | | EEUPDATE | (No parameters) Lists all supported Intel Ethernet adapters found in the system with their Bus, Dev, Fun, and Device IDs. | | /NIC=XX | Selects a specific adapter by its assigned number (usually 1-32). Always run the list command first to confirm the NIC number to prevent writing to the wrong card. | | /MAC=XXXXXXXXXXXX | Writes a specific MAC address to the adapter. The MAC address is usually entered as 12 hexadecimal digits without colons (e.g., 001122334455 ). | | /A <addrfile> | () Programs only the MAC address taken from a text file, leaving the rest of the EEPROM untouched. | | /D <imagefile> | ( /Data ) Writes a full binary EEPROM image file to the NVM. Use this to flash full firmware updates. | | /DUMP | Dumps the current contents of the EEPROM to a .eep file (and flash to .bin if present). Perform this immediately before any write to create a recovery backup. | | /ADAPTERINFO | Displays detailed adapter information (EtrackID, Image Version, Firmware Version) – very useful to verify the current firmware revision. | | /NIC=X /ADAPTERINFO | (Recommended first step) Displays detailed firmware and configuration information for the target adapter to confirm you have selected the right card. | | /CALCCHKSUM | Forces a recalculation of the EEPROM checksum and CRCs after writing data. | | /ALL | Selects all adapters found in the system to apply the command. Extremely dangerous; do not use unless you intend to flash the exact same data to every NIC. |

The of the Intel network adapter you are trying to configure eeupdate-5.35.12.0.zip

The EEPROM image is specific to the exact chip. Flashing an image designed for a 82574L onto an I350 or I210 will immediately corrupt the adapter. | Command | Function | | :--- | :--- | | /HELP or /