Wire the LM016L LCD to the digital pins of the Arduino to display real-time Liters per Minute (L/min) values.
Provide the for different flow sensor models. yf-s201 proteus library
Files included
To help you get your project up and running smoothly, tell me: Wire the LM016L LCD to the digital pins
Search for "YF-S201 Proteus Library" or check repositories from The Engineering Projects. Step 2: Install the Library Close the Proteus software. Step 2: Install the Library Close the Proteus software
const int sensorPin = 2; // Pulse input pin volatile long pulseCount = 0; float flowRate = 0.0; unsigned int flowMilliLitres = 0; unsigned long totalMilliLitres = 0; unsigned long oldTime = 0; void IRAM_ATTR pulseCounter() pulseCount++; void setup() Serial.begin(9600); pinMode(sensorPin, INPUT_PULLUP); // Attach interrupt to Pin 2, triggering on a falling edge attachInterrupt(digitalPinToInterrupt(sensorPin), pulseCounter, FALLING); void loop() if ((millis() - oldTime) > 1000) Total: "); Serial.print(totalMilliLitres); Serial.println(" mL"); pulseCount = 0; // Reset counter attachInterrupt(digitalPinToInterrupt(sensorPin), pulseCounter, FALLING); Use code with caution. Troubleshooting Common Simulation Issues