Epson 1390 Resetter !!exclusive!!

Open the access panel at the back or bottom of the printer, remove the saturated foam pads, wash them thoroughly with water, let them dry completely, and reinstall them.

Let me know if you need help for the software or if you want instructions on how to install an external waste ink bottle for your Epson 1390. Share public link epson 1390 resetter

Over time, this pad becomes saturated with ink from cleaning cycles and borderless printing. Once the counter reaches a certain limit, the printer will stop working, displaying a blinking light error (alternating green and orange) and prompting messages like or "Parts inside your printer are near the end of their service life." Open the access panel at the back or

physically clean the ink pads. If you reset the counter multiple times without replacing the pads or installing an external waste ink bottle (common in DTF/DTG setups), the ink will eventually overflow and damage your desk or the printer's internal electronics. JustAnswer For a more permanent fix, many professional users recommend installing a waste ink tank to bypass the internal pads entirely. Are you currently seeing the alternating red lights , or has the printer completely stopped mid-job? How to Reset Epson SP 1390 Printer Once the counter reaches a certain limit, the

You can take the printer apart, remove the felt pads, wash them, dry them, and re-install them. Note: You will still need to reset the electronic counter using software.

Click the button. Choose your Epson 1390 printer from the list of available port options. If you don't see your printer, ensure it is powered on and the USB cable is properly connected.

Everything is fine until two red lights start blinking. You try to print a high-quality A3 photo, but the screen says the ink pads are at the end of their service life. At this point, the printer is essentially a paperweight. 2. Finding the "Magic Wand": The Resetter To bring it back to life, users turn to a Resetter Adjustment Program