The specific settings within your software are crucial. Regardless of the software you choose, configure your cutting software with these settings:

Windows 10 rarely recognizes these cutters as "Plug and Play." You must manually configure the port settings:

Reboot your computer to ensure the system registers the new registry entries. Step 4: Configure the Device Manager

The key to connecting the CT630 to Windows 10 is the FTDI driver. Before physically connecting the cutter to your computer, you must install this driver. The driver is available on the CD that came with the cutter or can be downloaded from the official FTDI Chip website.

Once the driver is installed, you must match your Windows Device Manager settings to your cutting software. Open and find the Ports (COM & LPT) section. Locate your USB Serial Port (e.g., COM2 or COM3).